How to get your pet used to nail handling?
Clipping your pet's nails can be a tense and sometimes painful experience for them, and for you.
First, show him the nail grinder and let him sniff it while it is turned off. Then, turn it on so he can get used to the sound it makes. Have him sit while the tool is running in your hand. Give him positive reinforcement. Once he is used to the tool, try touching it to his nails. If he's not ready, you may need to repeat the above steps a few times.
If it is the first time for the pet to use nail grinder, it is recommended that the sharp fingernail or long wear parts should be grinded firstly, but not too much, avoid causing bleeding.
For pet's safety, it should not be more than 5 seconds for one lasting time, and be aware to adjust the grooming angle to polish pet nails.
How to use
Step 1: Charge this nail grinder with USB for almost 2 hours.
Step 2: According to the pet's size and characteristics of their nails, choose the suitable port for your pet.
Step 3: Holding the grinder with one of your hands, holding the pet pads with the other hand, put its nail into a port gently, and then begin to grind.
Step 4: Take off the plastic cover the grinder in an anticlockwise direction, turn it on and gently clean the surface of the nail grinder with eraser, paper or cloth to remove the nail powder.
Charging time: 2 hours
Running time: 3 hours
Input: AC100V-240V 50HZ/60HZ
Package size: 7.55"*3.26"*1.18"
Package weight: 5.95oz
1x pet nail grinder
1x USB charging cord
1x user manual