2.The levels can be altered by using up & down button.
3. This product is for pet training only, by training,the pet can understand the intention of its owner.Desirable results can only be achieved after a period of training.
Following the correct instructions, you can effectively train your pet and make it a docile and adorable creature.
How to match code for this dog training collar do this to connect receiver with remote before using-Step 1: press "Mode" on the remote control for 2-5 seconds. You will see numbers on the display screen. Step 2: Open waterproof plug on sideway of receiver. Step 3: Press "reset" hole on the left of the receiver and press the inside button. After that, the receiver will produce a "D" sound, indicating it's turned on. Step 4: Press the button "Y" on remote control to program (sync). The receiver produces a "D" sound again. You can let you hand go, the two machines are programmed well.
Connect the Transmitter with the Collar Receiver
1. Turn on the Transmitter and choose 1or 2 channels to encode.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5. The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.
1 x remote control
1 x collar
1 x charger cord
1 x test light&probes
1 x Maual
Trademark AGPtek products,AGPtek Dog training Collar is BLACK,please search "B00IUFJYUO" for the waterproof version